Salads
We are frontrunnersin hygienic saladprocessing

FTNON has complete processing lines for fresh salads, vegetables and herbs. Innovative processes to create perfectly prepared, washed and dried products. Visually attractive end products, in ready-to-eat or fresh-packed condition with enhanced shelf life.

Machines
Bin Tipper BTS

Bin Tipper BTS

The FTNON bin tipping systems are specifically designed for use in the food industry. 
With FTNON’s bin tipping systems, products can be brought into the processing line in the correct manner. Why choose the FTNON Bin Tipper BTS

  • fully electric (no hydraulics)
  • up to 180 degrees tipping angle
  • suitable for many bins and weights
  • special bin knocking system makes it possible to release difficult products
  • low maintenance
Contact Us
Air Sifter AIS

Air Sifter AIS

The air sifter is used to remove light waste particles out of the product flow. The product is transported with a conveyor through the air flow. The waste particles are lifted with the air flow and collected in a waste bin next to the air sifter. Why choose for the FTNON Air Sifter AIS

  • suitable for all kind of products
  • different width possible for different capacities
  •  effective cleaning due to high air inlet surface
  • easy to clean
Contact Us
Knocker Conveyor KNC

Knocker Conveyor KNC

The FTNON Knocker Conveyor KNC is specially designed to remove small particles out of the ‘dry’ stage of the processing line.
The conveyor removes fines, like insects and sand, by means of belt knockers underneath the perforated belt. The dirt particles fall through the belt and are collected in SS trays. Why choose the FTNON Knocker Conveyor KNC

  • optimal pre-cleaning of product
  • easy to clean
  • many capacities possible
Contact Us
CoreTakr CTI

CoreTakr CTI

Together, FTNON Delft and FTNON developed a unique automatization solution for de-coring Iceberg lettuce in the fresh produce industry. With this robotic de-coring line, the company strives to be at the forefront of technology and in line with any new automation developments in the market.

www.CoreTakr.com 

Contact Us
CoreTakr CTC

CoreTakr CTC

Together, FTNON Delft and FTNON developed a unique automatization solution for de-coring cabbage in the fresh produce industry. With this robotic de-coring line, the company strives to be at the forefront of technology and in line with any new automation developments in the market. 

www.CoreTakr.com

Contact Us
Swirl Bath Washer SBW

Swirl Bath Washer SBW

Pre-eminently designed for washing and mixing different products, such as sliced vegetables, salads and herbs.
The combination of special techniques gives an optimal washing result while the product is treated as delicately as possible. Why choose the FTNON Swirl Bath Washer SBW

  • optimal washing result
  • well controlled retention time
  • easy to clean
Contact Us
Flotation Wash line FLW

Flotation Wash line FLW

The Flotation Wash line FLW is specifically designed to wash and mix products such as cut salads, vegetables and herbs.
The combination of special techniques gives an optimal washing result, while the product is treated as delicately as possible. Why choose for the FTNON Flotation Wash line FLW

  • optimal washing result
  • well controlled retention time
  • easy to clean
Contact Us
Freshline Centrifuge FLC

Freshline Centrifuge FLC

The Freshline Centrifuge removes surface water from fresh-cut produce gently and consistently, thus enhancing quality.
High-volume flexibility allows use in batch processing or continuous flow mode; as a stand-alone solid performer or as the central point of line control. Patented technology and dependable performance make this dryer the ideal choice for your fresh-cut line.
This robust dryer is developed to handle high capacities. The 980 mm wide drum can handle loads up to 75 kg/batch. It can be delivered with 1, 2 or 4 drums. The new drum spike design ensures minimum product damage and optimal drum balance. Why choose the FTNON Freshline Centrifuge FLC

  • high capacities can be handled
  • new drum design ensures optimal drum balance
  • hygienic re-design has taken place
  • complete with PLC controls and modem connection
Contact Us
Super Batch Centrifuge SBC

Super Batch Centrifuge SBC

The Super Batch Centrifuge SBC is especially developed for drying fragile salads.
In this application, the product will be centrifuged in a conical drum, so the product can be divided evenly over the wall of the drum at a low speed and with a minimal falling height. This way, good drying will be achieved. The product damage is reduced to a minimum. Why choose the Super Batch Centrifuge SBC

  • less product damage
  • small foot print
  • hygienic design
  • easy to clean
  • low maintenance costs
  • low energy costs
Contact Us
Air Dryer AID

Air Dryer AID

The FTNON Air Dryer AID, for drying fresh salads, vegetables and herbs using air. There are many benefits of using the Air Dryer, including better quality and longer shelf life due to low humidity; quick and easy cleaning to allow for frequent product changes; minimal energy consumption and optimal re-use of waste energy. Why choose the FTNON Air Dryer AID

  • full control of final moisture content
  • dryer is easier to clean
  • quick changeover times
  • compact machine
Contact Us
Weighing Conveyor WEB

Weighing Conveyor WEB

The FTNON Weighing Conveyor WEB can be applied at several places in a processing line.
It is possible to control the product flow on the line before the weighing conveyor in such a way that a more constant product flow will be achieved. However, it can also be used to create a product mixture. Why choose the Weighing Conveyor WEB

  • optimal line control
  • accurate measurement
Contact Us
Mixing Conveyor MIC

Mixing Conveyor MIC

FTNON's Mixing Conveyor MIC specially designed to compose mixtures of various products.
The various products are brought onto the conveyor from crates or cartons in layers by an operator.

Contact Us
Suction Dryer SDS

Suction Dryer SDS

FTNON has developed a suction dryer which delivers the end products not only dryer but also in optimum condition.
This system, the Suction Dryer SDS, can be used as a standalone dryer or as a pre-drying step before spin- or air-drying. The concept of the suction dryer is to create enough gentle air flow at a high rate, through the product flow, to dry the product in a controllable manner. This removes droplets of water.

 

Contact Us
We are responsible
This year we saved
45
million liters
of water
That is the equivalent of the water usage of 900 people on annual basis in the Netherlands
Case study
Robotic decoringat HeemskerkFresh & Easy

The high-end food processing company Heemskerk is the first on the continent who decore their lettuce without human action