Pet food
Tailor-madesolutions forpet food processing

For more than 35 years, FTNON has supplied the wet pet food industry with the most economical and effective way of processing through steam technology. In combination with meat preparation, mixers, emulsifiers, breakers, hoppers, extruders and color injection, FTNON is the high-end partner in the industry.

Machines
Pet food Hopper PEH

Pet food Hopper PEH

To guarantee a continuous supply of meat emulsion to the extruder of the steam tunnel, a pet food product buffer is included. This buffer or hopper is suitable for pet food emulsions.

Contact Us
Pet food Color Injection System PCI

Pet food Color Injection System PCI

The FTNON Pet food Color Injection System PCI has proven to create very efficient in-line coloring, without disturbing the extrusion process.
The coloring agent is injected directly into the mono pump of the pet food product hopper. This means that one mono pump is connected to the color injection system. This enables operation with or without colored product.

Contact Us
Pet food Extrusion Unit PEE

Pet food Extrusion Unit PEE

The extrusion unit is executed for installation in a wet pet food line, located over the belt of the steam tunnel. The unit will form ropes or a slab ready for cooking. The hopper of the extruder is executed with a fixed dividing plate.

Contact Us
Pet food Steam Tunnel PST

Pet food Steam Tunnel PST

The steam tunnel is utilized for heating an emulsion from + 5° C up to ± 90° C core, depending on capacity, rope size, specific heat and recipe.
The tunnel mainly exists of 2 chambers through which a processing belt is continuously running. The tunnel is sealed on both sides with water locks. The top hood can be lifted automatically for easy cleaning purposes. The bottom hood is bolted and can be opened for maintenance purposes. Heat is transferred to the product in 2 ways:

  • Steam injected into the top hood condenses on the product surface and heats the emulsion
  • The steam injected below the processing belt condenses on the belt and heats the emulsion from the bottom
Contact Us
Pet food Cutter PEC

Pet food Cutter PEC

The cutting unit of the Pet food cutter PEC mainly consists of 1 shafte quipped with blades installed in a framework, all in stainless steel. The speed of the shaft can be adjusted with a  frequency controller. By altering the RPM of the shaft, the length of the product can be changed. The total cutting unit can be adjusted under a variable angle (0°/45°). This means that the chunks can be cut at angle between 90° and 45°. The scraper and the counter-knife are always stationary and the cutter-knife turns without touching the counter-knife.

Contact Us
Pet food Air Cooler Non Circulated ACN

Pet food Air Cooler Non Circulated ACN

The cooling tunnel is installed for use in a wet pet food line. The product is cooled by using the environment air.

Contact Us
Steam consumption savings
On every DCC; steamer installed; we save up to; 90% of steam
Case study
..it all leadsto the optimalcondition ofthe end product.

Reducing water consumption, maximizing dust removal and keeping the date's characteristics in shape were the essential ingredients for inventing the new line.